PORTABLE LOW-RISE LIFT

Lifting Capacity: 3.0t (7,000 lbs)
Lifting Time: 40 Seconds

The RSX-7 is equipped with the safety stop device at the height of 300mm, both control buttons are needed to lower down the lift from 300mm to ground with tone alarm for safety.

• 2-Dual synchronous cylinders are applied to assure the lifting level on both platforms
• Automatic safety device controlled electrically. No air needed
• Hydraulic safety locks system instead of The mechanical safety locks
• Hydraulic equalization for easy access between ramps
• Electrical control system operated by Up or Down button
• Low profile design. The closed height is only 115m

FLUSH-MOUNT SCISSORS LIFT

Lifting Capacity: 3.5t (8,000 lbs)
Lifting Time: 51 Seconds

• Electric/Hydraulic power system
• Dual synchronous cylinders are applied to assure the lifting level on both platforms
• Platforms are designed to be extended. It is suited for most of the car
• Automatic safety device. The safety release is operated by air cylinders
• Electro-air control cabinet
• Hydraulic equalization, No torsion bar need

NON-ALIGNMENT SCISSORS LIFT

Lifting Capacity: 4.0T (9,000 lbs)
Lifting Time: 55 Seconds

The same as our other lifts, adhere to the principle of safety, durability, convenience and best performance. By the strict control of design, material-selection, manufacturing and examination, assure Rover Lifts Scissors lifts offer you the best quality.

• Dual synchronous cylinders are applied to assure the lifting level on both platforms
• Electro-air control system, mechanical safety locks
• Sand resistance platform to avoid skidding
• Heavy duty design, the X serial scissors lifts use 150*75mm tube to make it strong and assure runaways remain level during working

ALIGNMENT SCISSORS LIFT

Lifting Capacity: 4.0T (9,000 lbs)
Lifting Time: 55 Seconds

• Dual synchronous cylinders are applied to assure the lifting level on both platforms
• Electro-air control system, mechanical safety locks
• Skid proof diamond runway
• Integrated rear slip-plates
• Heavy duty design, the X serial scissors lifts use 150 x75mm tube to make it strong and assure the runways remain level during working
• Optional Jack and Turnplate

NON-ALIGNMENT SCISSORS LIFT

Lifting Capacity: 5.5T (12,000 lbs)
Lifting Time: 65 Seconds

The Heavy-duty scissors lifts use four cylinders to support and each both cylinders are designed working synchronously.

• 2-dual synchronous cylinders are applied to assure the lifting level on both platforms
• Electro-air control system, safety self lock mechanism
• Sand resistance platform to avoid skidding
• Heavy duty design, the X serial scissors lifts use 150 x 75mm tube to make it strong and assure the runways remain level during working
• Optional Jack

ALIGNMENT SCISSORS LIFT

Lifting Capacity: 5.5t (12,000 lbs)
Lifting Time: 58 Seconds

The Heavy-duty scissors lifts use four cylinders to support and each both cylinders are designed working synchronously.

• 2-dual synchronous cylinders are applied to assure the lifting level on both platforms
• Electro-air control system, safety self lock mechanism
• Sand resistance platform to avoid skidding
• Skid proof diamond runway
• Heavy duty design, the X serial scissors lifts uses 150 x 75mm tube to make it strong and assure the runways remain level during working
• Optional Jack and Turnplate

ALIGNMENT SCISSORS LIFT

Lifting Capacity: 7300kg (16,000 lbs)
Lifting Time: 110 Seconds

The extended length and heavy-duty design model was designed for vehicle alignments and general services work and accommodate a wide variety of wheelbases and full-size trucks. The heavy-duty scissors lifts use four cylinders to support and each both cylinders are designed working synchronously.

• 2-dual synchronous cylinders are applied to assure the lifting level on both platforms.
• Electro-air control system, safety self-lock mechanism.
• Skid proof diamond runway.
• Integrated rear slip-plates.
• Heavy duty design, the X serial scissors lifts use large steel tube to make it strong
  and assure the runways remain level during working.
• Optional Jack and Turnplate.